Sony UPX-2000 Manual De Instrucciones página 41

To reprint the image transferred from the station
Press the PRINT button on the station.
When reprinting, you can change the B/W/COLOR, SPLIT settings and
color quality adjustment.
Notes
• Do not turn off the power during printing. If you do so, paper may not be
ejected and may jam in the printer.
• Do not pull the paper out till the printer finishes printing.
• Do not leave the printouts of more than 10 sheets on the paper cover.
Doing so may cause jamming.
To stop transferring the data to the printer or printing in
progress
Press the STOP button on the printer. The paper being printed is
immediately ejected. The printer then returns to standby status.
Note
While the message "TRANSFERRING IMAGE..." is displayed on the
LCD of the station, printing cannot be stopped.
If the printer does not print
The printer will fail to print in the following cases:
• When the ALARM, PAPER, or RIBBON indicator is lit.
• While any messages is displayed on the LCD of the station
For details, see "Indicators on the Front Panel of the Printer" page 56.
When the Self-Laminating Color Printing Pack UPC-2040A is
used
The thermal head of the printer needs to be preheated to start printing.
When, for example, printing immediately after turning on the printer, the
PRINT lamp of the printer lights during preheating, then printing starts
automatically when the printer is ready.
Notes
When storing your printouts:
• Avoid storing the printout in a location subject to high temperatures, high
humidity, excessive dust and direct sunlight.
• Do not stick tape on a printout. Also, avoid leaving a plastic eraser on a
printout or placing a printout in contact with materials which contain
plasticizer (under a desk mat, for example).
• Do not allow alcohol or other volatile organic solvents to come into
contact with the printouts.
Inst SS Ver.4.0
41
3-865-646-14(1)