Tabla de contenido
Publicidad
120
ii-1
ii-2
Installation
ii Transportation, unpacking and contents
Transportation
The wheel balancer is supplied on a pallet.
• Use a pallet truck (Figure ii-1) to bring the wheel
balancer to its working area.
Unpacking
WARNING: PREVENT THE STRAPS FROM
SPRINGING LOOSE AFTER BEING CUT.
Cut the straps.
•
Open the top of the box.
•
Remove staples at the bottom of the box. Lift the
•
box up and over the unit.
Carefully unwrap the balancer and spare parts
•
supplied.
Check the contents of the shipment.
•
Contents
The shipment contains:
-
a wheel balancer with Declaration of Conformity
(CE).
-
an Operator's Manual.
-
the accessories mentioned in Section 3.1 of the
Operator's Manual.
-
3 storage hooks and fl anges.
-
a mains power cable.
-
a wheel guard assembly.
Tools required
-
screwdriver / bar (diameter 4.5-5 mm)
-
keys:
13,
17 mm
Positioning
Remove the bolts that secure the wheel balancer
•
on the pallet.
CAUTION: DO NOT LIFT OR MOVE THE WHEEL
BALANCER BY THE MAIN SHAFT OR MEASURING
UNIT.
Refer to Figure ii-2.
• Move the wheel balancer from the pallet to its
working location.
Note: Use the storage hooks (mount as
instructed in
section
iii) and/or the wheel guard shaft
to handle the wheel balancer.
Publicidad
Tabla de contenido
