Scale Address; Output Mode; Battery - Baxtran STA Serie Manual De Usuario

User's Guide

SCALE ADDRESS

For multiple scales application, address can be assigned to identify the uniqueness. Scale sends out
address number in the serial communication protocol.
Scale address
By default,
To learn more about serial communication protocol, please refer to Technical Manual.

OUTPUT MODE

There are optional two modes of data output, "0" continuous way, and "1" manual way.
In "0" continuous way, scale sends out data continuously all the time, while in "1" manual way, scale
only sends data out when key
The default
To maximize the battery life, please note the following battery maintenance guide.
▪ This scale is powered by a 6V rechargeable lead-acid battery.
▪ The battery is permanently attached to the battery door. To remove the battery pack, turn off the two
screws on the access door, pull the battery pack straight out, and unplug the battery cable from the
scale.
▪ The battery works from 80 hours to 200 hours (depending on LED display brightness setting), before
requiring recharging.
▪ In order to conserve battery life, the scale includes an AUTO POWER-OFF function which senses opera-
tional status for no activity after certain minutes that user sets, and turns the scale off. An additional
battery saving feature is the auto IDLE function. This feature preserves battery life by dimming the
display after specified minute of no scale activity.
▪ Charging time for a completely discharged battery is approximately 6 hours.
▪ To obtain maximum service life from your batteries, they should be stored between -20°C (-4°F) and
+50°C (122°F). Stored batteries should be recharged every three months. Battery is fully charged when
the status indicator is red.
48
can be assigned from 00 to 99.
scale address is set to 00.
is pressed.
F2
output mode
is set to "0" continuous way.
STA/STR/STC

7. BATTERY