Setting Display Mode - Sharp LL-T19D1 Manual De Funcionamiento

Setting display mode

Color tone or brightness can be changed with one
command.
STD
Displays image with the color tone results from
original scheme of liquid crystal panel.
OFFICE
Display brightness is lowered. The brightness is
set to a level that is easier on the eyes than with
other modes and saves power.
sRGB
sRGB is international standard of color
representation specified by IEC (International
Electrotechnical Commission).
Color conversion is made in taking account of
liquid crystal's characteristics and represents
color tone close to its original image.
VIVID
Displays an image with dynamic and VIVID
primary colors.
- If [DISPLAY MODE] is set to [OFFICE], [sRGB] or
[VIVID], [WHITE BALANCE] is set to [STD].
How to set
Press the / MODE button when the OSD Menu is
not displayed.
Each time the button is pressed the next menu item
appears. (STD → OFFICE →sRGB → VIVID →
STD)
On Screen display for adjustment disappears
several seconds after the last operation.
Adjusting the screen display
15