Special Safety Instructions - Phoenix Mecano Alpha Colonne Instrucciones De Montaje

5.2 Special safety instructions

•
Work with the lifting column may only take place in accordance with these instructions.
•
Wear the necessary personal protective equipment (PPE) at all times during work.
•
The device may only be opened by authorized specialist personnel. If there is a fault with the
lifting column, we recommend that you contact the manufacturer or send this lifting column
for repair.
•
Unauthorized conversions of or changes to the lifting column are not permitted for safety
reasons.
•
The compressive and tensile forces and torque loading of these lifting columns specified by
Phoenix Mecano Komponenten AG must not be exceeded.
•
The type plate must remain legible. It must be possible to identify the ratings data effortlessly
at any time.
•
Safety-relevant hazard symbols identify danger areas on the product.
•
With an overhead installation of the lifting column, fixed loads must be secured against falling
down.
The danger area underneath the application must be marked in the documentation of the end
product.
•
Safety-relevant devices must be inspected for proper function, damage and completeness at
regular intervals.
•
If a power supply cable and/or feed line is damaged, the lifting column is to be taken out of
service immediately.
5. Safety
45