STERWINS 40VPS2-24.1 Instrucciones De Montaje página 342

• Remove any adjusting key or wrench before turning the power tool on. A
FR
wrench or a key left attached to a rotating part of the power tool may result in personal
injury.
ES
• Do not overreach. Keep proper footing and balance at all times. This enables
PT
better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
IT
clothing and gloves away from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
EL
• If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
PL
can reduce dustrelated hazards.
• Do not let familiarity gained from frequent use of tools allow you to become
RU
complacent and ignore tool safety principles. A careless action can cause severe
injury within a fraction of a second.
KZ
2.7 POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power tool for your application.
UA
The correct power tool will do the job better and safer at the rate for which it was
designed.
RO
• Do not use the power tool if the switch does not turn it on and off . Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
BR
• Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
EN
power tools. Such preventive safety measures reduce the risk of starting the power tool
accidentally.
• Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may aff ect the power tools
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained powertools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations diff erent from those intended could
result in a hazardous situation.
342