5.9 Hook and loop foot straps with instep pads
Attach the foot straps to the heel part of the footplate with two rivets or screws positioned beside
one another (Fig. 39). In addition, the foot straps may also be used for the forefoot area.
Simply open and close the foot straps with the hook and loop closure.
5.10 (⊗) Headrest
Two headrest models are available; one for the use with and one for the use without padding.
When using the headrest without padding (Fig. 40) run the headrest straps around the rear of
the backrest. Connect the buckle and pull the straps tight.
The headrest, with matching padding (Fig. 43), is screwed to the center part of the back padding
at the desired height (Fig. 47). Both are removed together before the buggy/ stroller is folded.
5.11 Swivel lock
The swivel lock is installed before delivery by your authorized dealer or the manufacturer.
To open the swivel lock, turn the locking bolt by 90° until the bolt engages in the bore hole of
the caster fork.
46
39
41
40
42