Padding - Otto Bock Lisa Manual De Instrucciones

Disengage the swivel lock by pulling the locking pin out of the caster fork and turn the locking
pin by 90° so that it remains in open position.
5.12 (⊗) Padding
The middle part of the padding (Fig. 43) is provided with an insert, to which the headrest, shoul-
der straps of the five-point belt and groin strap are connected. Therefore, it is possible to remove
"everything with one grip", before folding the buggy/ stroller.
To mount the padding, you proceed as follows.
• Place the padding onto the seat.
• Pull the holding strap (Fig. 44) underneath the backrest, wrap the strap around the seat edge
and affix the hook and loop straps.
• Wrap the flap at the rear side of the padding (Fig. 45) around the upper edge of the backrest
and affix it to the hook and loop closure.
• Pull the side paddings (Fig. 46) around the left and right sides of the front frame (the armrests,
if possible) towards outside and affix the hook and loop closure.
• To remove the padding, please proceed in the reverse order.
43
45
44
46
47