Controller Placement - Lorentz PSk2-7 Manual De Instalación Y Operación

8.2 Controller Placement

The Controller is rated IP54, which means that it is protect-
ed against water splashes and harmful amounts of dust
when properly installed.
Electronic devices are most reliable when they are protected
from heat. Mount the controller where it is shaded from
the midday sun. An ideal location is in permanent shade. If
no shade is available, cut a piece of sheet metal and bolt it
behind the top of the controller. Bend it over the controller
to provide shade.
This is especially important in extremely hot locations. Ex-
treme heat may trigger a thermal function in the controller
causing it to reduce the power consumption or turn it off.
Figure 4: Controller dimensions for installation
Table 4: Controller dimensions for installation
SCALE 1 : 10
Model
W1
all
320
W1
SCALE 1 : 10
Dimension [mm]
W2 H
290 500
Controller Installation
Figure 3: PSk2 Controller
D1
SCALE 1 : 10
H1 H2
450 421 226
W2
Net Weight
[kg]
D1 d
18
9
21