Springlane Mila Manual De Instrucciones página 27

The warranty does not cover faults and
malfunctions of the appliance that are
the result of a lack of descaling.
REPLACEMENT
If Mila's blades get blunt after a period of
use, you can replace them yourself. Only
use original spare parts!
ATTENTION! Exercise
particular care when
handling the blades, also if they are
dull. There is a risk of injury!!
1. Ensure that Mila is not connected to
the power supply.
2. Use two rugged tools such as long
screwdrivers. Protect the base of the
mixing chamber, e.g. by placing several
layers of paper or a fitting piece of
silicone underneath the blades, to
prevent scratching the coating.
3. Position one tool on the back side of
the blade and slightly tilt it with the
blade exerting a bit of resistance.
4. Use the other tool to strike against the
tilted tool above the mixing chamber
to loosen the blade.
5. After loosening the blade, carefully
remove it by turning it and insert the
new blade.
6. Carefully tighten the new blade by
hand. Start a manual cleaning program-
me using the "Cleaning" button. The
blade fastens itself during the first uses.
27