Service And Maintenance; Accessories, Tools - Festool PLANEX LHS 225 EQ Manual De Instrucciones

 The machine has an internal malfunction. Have
the machine inspected by an authorised service
workshop.

Service and maintenance

WARNING
Risk of accident, electric shock
 Always pull the plug out of the socket before
performing any type of work on the machine.
 All maintenance or repair work requiring the
motor housing to be opened must be carried
out only by an authorized service workshop.
Maintenance or repair work carried out by an
unauthorized person can lead to the incorrect
connection of the wiring or other components,
which in turn can lead to accidents with seri-
ous consequences.
 Check the plug and the cable regularly and should
either become damaged, have them replaced
by an authorised after-sales service workshop.
 To ensure constant air circulation, always keep
the air vent slits in the motor housing clean and
free of blockages. Read the instructions on vi-
sual warning signals in chapter "Operation".
 Clean the contact slide regularly. Do not use
hard objects.
The machine is equipped with self-disconnecting
special carbon brushes. If they are worn, power is
interrupted automatically and the machine comes
to a standstill.
 Tighten the clamping levers if they no longer
capable of retaining the extension pipe prop-
erly:
 Turn the screws on the clamping levers [3-1]
and [3-2] approx. 1/8 of a turn.

Accessories, tools

For safety reasons, only use origi-
nal Festool accessories and tools!
The accessory and tool order number can be found
in the Festool catalog or on the Internet under
www.festoolusa.com.
Systainer
Many Festool products are shipped in a unique
system container, called "Systainer".
This provides protection and storage for the tool
and accessories. The Systainers are stackable
and can be connected together. They also can be
conntected atop Festool CT dust extractors.
To open the Systainer:
– Turn the T-loc [10-1] to the position
To lock the Systainer:
– Turn the T-loc [10-1] to the position
To connect two Systainers:
– Place one Systainer on the top of the other
(Fig. 10A).
– Turn the T-loc [10-1] to the position
(Fig. 10B).
The Systainers are connected and locked.
 A new generation Systainer is connectable on
top of a previous generation Systainer by the
four latches of the previous Systainer.
.
.
or
15