Domo DO927BFK Manual De Instrucciones página 43

ce the door block to fit the pper door and move
osite side. You may
he door block to fit the
3. Remove the metal screws, hinge and cover plugs. Place them on the other side. Lift the
door off and place it on a soft surface to prevent scratching.
t the lower door and place
d surface to prevent it from
dle hinge by removing
he lower door and place
crews' covers and place
urface to prevent it from
pposite side.
4. On the top of the door, there is a Teflon bush to guide the hinge and a cover plug. Move
tion of the plastic tube and
ws' covers and place
this to the other side.
top of the lower door.
osite side.
On the bottom of the door there is a door stop and a Teflon bush to guide the hinge.
oor block, screw and plastic
Move this to the other side.
n of the plastic tube and
e lower door and move
p of the lower door.
pposite side. You may
r block, screw and plastic
ce the door block to fit the
ower door and move
osite side. You may
he door block to fit the
5. Remove the lower screws, hinge and the adjustable foot from the base of the appliance.
Remove the adjustable foot from the other side of the base and move it to the same
position on the opposite side of the base.
6. Fasten the screws, hinge bracket and the adjustable foot to the other side of the base.
NSTALLATION
ATION
Remove the lower screws and lower
hinge from the unit bottom. Reverse the
e the lower screws and lower
lower hinge, move and secure it with
rom the unit bottom. Reverse the
the lower screws to the opposite side of
inge, move and secure it with the unit bottom. Carefully set the lower
door back into place, inserting it onto the
wer screws to the opposite side of
lower hinge.
t bottom. Carefully set the lower
ack into place, inserting it onto the
inge.
7. Carefully replace the bottom part of the door into position. Make sure that the door is
aligned horizontally as well as vertically so that the seal is closed on all sides before you
Reverse the middle hinge. Screw the
tighten the centre hinge completely. Return the hinge to its positions and fasten it.
middle hinge onto the opposite side of
the unit.
e the middle hinge. Screw the
Ensure the lower door is aligned
hinge onto the opposite side of
horizontally and vertically, so that
t.
the seals are closed on all sides
before finally tightening the hinge.
ure the lower door is aligned
izontally and vertically, so that
seals are closed on all sides
Carefully set the upper door back into
ore finally tightening the hinge.
place, inserting in onto the middle hinge.
Insert the upper hinge and screw it
www.domo-elektro.be
tightly to the top of the unit.
ly set the upper door back into
Middle hinge
Middle hinge
unscrew
unscrew
1/2/16 10:43 am
1/2/16 10:43 am
43
DO927BFK