Executing The Learn Function; Alternative Access To The Learn Function; Restarting The Learn Function; Stopping The Learn Function Prematurely - BrandTech HandyStep touch Instrucciones De Manejo

78

Executing the learn function

 You have already filled the tip.
a. Tap on the button, then ‚Setting interval button, then ‚Setting interval
time' and navigate back using the
 The learn function is active.
b. Dispense liquid at least 3 times, by briefly pres-
sing the STEP button.
c. Afterwards, the average time appears next to Afterwards, the average time appears next to
the icon.
 The learn function is completed.
 You can immediately dispense liquid by holding
down the STEP button.

Alternative access to the learn function

Tap on the button, then swipe the
switch to the right.
Confirm the setting by tapping the

Restarting the learn function

If you notice that the pause time is too long or too short while operating the
device, you can restart the learn function. Alternatively, you can also adjust
the pause time manually.

Stopping the learn function prematurely

The first time the STEP button is pressed, a 10 s countdown begins. After
it expires, the learn function ends automatically.
To stop the learn function beforehand, tap on the X button.
To use the calculated pause time immediately, hold down the STEP button.

Exiting the learn function

a. Tap on the button.
b. Swipe the switch to the left.
c. Confirm the setting by tapping the
 The learn function is exited.
 The operating mode appears.
 The current interval remains set.

Handling residual volumes

For information on handling residual volumes, see „Switching to emtying"
→ 71 and „Aspirating liquid" → 70 .

Options

a. In the operating mode, tap on the symbol
 The Options menu appears.
Option
'Edit Pause Time'
'Setting interval time'
button.
button.
button.
Meaning
Edit the time between the individual dispensing steps.
Start the learn function.
Initial display:
Learn function OFF:
Learn function ON:
Learn function active:
.