Description Of The Device; Operation; Energy Saving Tips; Using The Cooler - Mobicool T35 Instrucciones De Uso

_T35_W35.book Seite 10 Dienstag, 17. Oktober 2006 2:01 14

Operation

4.1

Description of the device

Your cooler consists of the following parts:
No. in
fig. 2, page 4
1
2
3
4
5 Operation
The cooler is switched on and off via an operating panel with a cover
(fig. 2 3, page 4). The operating displays are visible at all times.
Note
I
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the "Cleaning and maintenance"
chapter on page 13).
5.1

Energy saving tips

Choose a well ventilated installation location which is protected against di-
rect sunlight.
Allow warm food to cool down first before placing it in the device to keep
cool.
Do not open the cooling device more often than necessary.
Remove individual drinks bottles through the bottle hatch (fig. 2 4,
page 4).
Do not leave the lid or door open for longer than necessary.
5.2

Using the cooler

Note
I
Like every cooling device, your cooler must be properly ventilated
so that any heat created can dissipate. Otherwise proper function-
ing cannot be ensured.
➤ Place the cooler on a firm base.
10
Description
Handle
Ventilation slots
Operating panel and connection sockets for voltage
supply (fig. 3, page 4)
Bottle hatch
T35/W35