Frame; Side Frame; Folding System; Rear Wheel - Invacare Alu Lite Manual Del Usuario

2.2. Frame

2.2.1 Side frame

The side frames are designed to accommodate fixation of
the front and rear wheels. No adjustment is required on side
frames.

2.2.2 Folding system

It consists of two cross-bars which integrate the seat rails.
To fold and unfold your wheelchair, see chapter A " General "
paragraph 2.1. No adjustment is required on folding system.
2.3. Rear wheels

2.3.1 12" Wheels

16
The 12" (305 mm) rear wheels are composite wheels. They
are delivered with solid tyre.

2.3.2 Axles

The wheelchair is equipped with fixed axles on rear wheels.

2.4. Castors

The solid front wheels are available in 8" x 1 1/4" (200mm x
28 mm) diameter.

2.5. Brakes

2.5.1 Manual brakes

- Locking Hand Brake (photo 4)
1. Push down on the bottom portion of the brake handle (A)
until an audible click is heard.
2. Refer to Unlocking Hand Brake, see following paragraph.
- Unlocking Hand Brake (photo 4)
1. Pull up on the top portion of the brake handle (A) to
release.
2. Release the brake handle.
- Using Hand Brake (photo 4)
1. Pull up on the top portion of the brake handles (A) toward
the push handles.
2. Do one of the following:
• Remain stationary - Hold the brake handle up.
• Continue mobility - Release the brake handle.
A
4