Front Panel - SKP Pro Audio MAX G-X SERIE Manual Del Usuario

FRONT PANEL:

1、Power switch
When this switch is pushed down, the power on , the amplifier is ready to work.
2、Bridge mode indicating LED (Blue)
This LED will be on when working under Bridge mode.
3、CHA/CHB protection indicating LEDs (Yellow)
The LEDs will be on in the following three conditions:
A. 3-5 seconds after turning on power, or after turning off power, the amplifier is under unstable status.
Indicating the power amplifier is still disconnected from speakers.
B. When the amplifier parts' temperature is over 93 .
C. When something is wrong with the amplifier.
4、CHA/CHB peak level indicating LEDs (Red)
The LEDs will be on in the two situations:
A. When the output signal has reached its clipping level, the LED lights; possibly resulting in distortion. Should
this occur, adjust the input level control so that the Peak LED turns off.
B. As the signal has been input, the Peak LED lights continuously, but the speaker has no voice, it is
possibly that it is short circuited for loading. Youshould turn off the amplifier. Find out where the trouble is and
renew operation.
5、CHA/CHB signal indicating LEDs (green)
This LED will be on when the amplifier is working normally.
4