Adjust Water - Rain Bird STP-400i Manual De Instrucciones

Adjust Water

!
NOTE: Instead of changing the settings for each zone, you can adjust the amount of time you water for each
zone with one simple adjustment using the WATER ADJUST function. Your scheduled start times will not
change, but the actual zone run time will be adjusted.
Step 1
Turn the dial to
ADJUST WATER
Step 2
Use the left UP/
DOWN arrows
to adjust the
percentage
increase or
decrease to the
initial zone run
time setting
8
STPi Controller Operation Manual
637589-01 Rev 1 (STP user manual (INTL)) source.indd 8
Use this simple option to make run time adjustments that account for seasonal
variation, without changing all of the initial zone settings.
!
NOTE: Reset dial to AUTO position after making
any adjustments to the programming.
TIP: Automatically
adjust watering of
each individual zone
by using left UP/DOWN
arrows to adjust from
-90% to+100%. It is
important to note that
the baseline schedule
is set at 0% and not
100%.
EXAMPLE: If Zone 1 is
scheduled to water for
10 minutes and you
set ADJUST WATER to
+50% then Zone 1 run
time will be increased
to 15 minutes.
6/26/2008 2:19:05 PM