Maintenance And Care; Disposal - Denios PolySafe-Depot Typ K Instrucciones De Uso

not extend over the edge of the spill pallet.
Close the doors once loading is complete.


Maintenance and care

13
Regular maintenance and care will extend the life of the Depot.
 Keep the spill pallet dry and free from contamination.
 Check the spill pallet regularly for leaked fluids, and check underneath too.
 Safely dispose of leaked fluids immediately.
 Lubricate the locks and hinges with commercially available grease.
 Check and if necessary tighten the floor mounting bolts.
 Only use manufacturer's original replacement parts.

Disposal

14
Before disposal clean the spill pallet thoroughly to remove any hazardous material resi-
due.
The spill pallet is made from mainly plastic and metal parts. After decommissioning, follow local legislation
when disposing of any waste.
Copyright
As defined by the Act on unfair competition, this Fehler! Verweisquelle konnte nicht gefunden werden. is deemed to be a certificate.
Copyright is held by
DENIOS AG
Dehmer Straße 58-66
32549 Bad Oeynhausen
Tel.: +49 5731 753-0
Fax: +49 5731753-199
E-Mail: info@denios.de
This Fehler! Verweisquelle konnte nicht gefunden werden. is intended for the operator of the storage system and its personnel. It
contains texts, images and drawings which need the express consent of DENIOS AG before they can be

reproduced,
 distributed or

otherwise shared, either in full or in part.
© Copyright DENIOS AG 2013
235412_BA_PSD_K_002_INT
NOTE
NOTE
.
Not subject to revision
Seite 17 von 31
07/2015