Turning on the Hypoglycemia (HYPo) Indicator
Step 10
In this setting, the hypoglycemia (possible low blood sugar) level
can be selected.
'HYPo' will be displayed with the
▲ or ▼ button, the screen will display 'On' or 'OFF' . Press the
S button when 'On' appears to set the hypoglycemia level.
Press the ▲ or ▼ button until the desired hypoglycemia level
between 20 and 90 mg/dL appears. Press the S button to confirm
the level and go to the next step.
If you do not want to set the indicator, press the S button while
the screen displays 'OFF' .
Caution:
Before setting the hypoglycemia level, ask your
veterinarian/veterinary surgeon to help you decide what the
hypoglycemia level is.
18 www.i-sens.com
symbol. On pressing the
Setting the 'Test Result Reset' (Deleting the saved test
results)
Step 11
In this setting, the test results saved in the meter can be
deleted. Please note that if you select 'YES' , the saved test
results will be deleted and cannot be restored.
'dEL' and 'no1' will be displayed on the screen. Press ▼ to
switch between 'YES' or 'no' . Press ▲ to select a desired dog
(no 1–4) or cat (no 1–4) to delete the saved test results.
To delete all the saved test results, press the ▲ button until the
and
symbols, and 'ALL' appear on the screen. Press the
▼ button until 'YES' appears on the screen. When 'YES' blinks,
press the S button. All the saved test results will be deleted
from the meter. Refer to the process shown in the figure below.
If you do not want to delete the results, press the S button
while the screen displays 'no' . Then, the screen will return to
step 2. See page 14.
www.i-sens.com 19