Note:
The meter may switch off if the blood sample is not
applied within 2 minutes of the
screen. If the meter turns off, remove the strip and reinsert it,
and apply the blood sample after the
the screen.
Step 11
The test result will appear after the
meter counts down from 5 to 1. The
result will be automatically stored in
the meter's memory.
Gently apply pressure to the test site
with sterile gauze or cotton wool to help
stop the blood flow.
Step 12
Slide the ejection button to discard
the used strips safely in disposable
container.
If the test strip is removed after the
test result is displayed, the meter
will automatically switch off after 3
seconds.
30 www.i-sens.com
symbol appearing on the
symbol appears on
Discarding Used Lancets
Step 1
Unscrew the lancing device tip.
Step 2
Stick the lancet into the saved
protective disk. Push the lancet
ejector forward with the thumb and
simultaneously pull out the sliding
barrel to dispose of the used lancet in a
proper biohazard container.
Caution:
The lancet is for single use only. Never share or reuse a
lancet. Always dispose of lancets properly.
www.i-sens.com 31