Hazet-Werk System 5000 CT Instrucciones De Uso página 31

USA
7. Operation
How to get the exact torque
The HAZET torque wrench must only be ope rated
with the handle at right angles to the screw con-
nection!
The force used must be applied uniformly by hand
at the centre of the handle (ring mark
• Torque function only possible in working direc-
tion (see arrow)
• The torque wrench must always be placed in
such a way that the screw tightening is made
in direction of the arrow. Thus, bolt connections
with right and left-hand thread can be tightened
with the specified release accuracy.
• In order to prevent incorrect load application, do
not use extension pieces or universal joints.
• In use, the HAZET torque wrench indicates the
moment when the adjusted torque has been
reached
• audibly by clicking,
• by a close-gap release which can be felt,
• visibly, by release of the red signal
transmitter
The operation
imme di ately!
• The greater the preset torque, the stronger the
audible or sensory signal.
Design and Function
.
5
must
2
).
then be
GB
stopped
31