Lockout - OHAUS Adventurer Pro AV53 Manual De Instrucciones

Adventurer Pro
Unit
Select Yes to return all Unit menu items to their
factory settings.
Print-1
Select Yes to return all Print-1 menu items to
their factory settings.
Print-2 (If COM2 is installed)
Select Yes to return all print-2 menu items to
their factory settings.
RS232-1
Select Yes to return all RS232-1 menu items
to their factory settings.
RS232-2 (If COM2 is installed)
Select Yes to return all RS232-2 menu items
to their factory settings.
GLP Data
Select Yes to return all GLP Data menu items
to their factory settings.
GLP Print
Select Yes to return all GLP Print menu items to
their factory settings.

Lockout

Select Yes to return all Lockout menu items to
their factory settings.
Global
Select Yes to return the menu items in all sub-
menus to their factory settings.
End Reset
Press the Yes button to advance to the Lockout
menu. Press the No button to return to Setup.
3.7.11 Lockout
Use this submenu to prevent unauthorized
changes to menu settings. If a submenu is
locked, its menu item settings can be viewed
but not changed.
LOCKOUT
Cal On/Off
Setup On/Off
Readout On/Off
Mode On/Off
Unit On/Off
Print-1 On/Off
Print-2 On/Off
RS232-1 On/Off
RS232-2 On/Off
GLP Data On/Off
GLP Print On/Off
Reset On/Off
Lock Set On/Off
End Lockout
Cal
Set On to lock and hide the Calibration Menu.
Setup
Set On to lock the Setup Menu.
Readout
Set On to lock the Readout Menu.
Mode
Set On to lock the Mode Menu.
Unit
Set On to lock the Unit Menu.
Print-1/2
Set On to lock the Print-1/2 Menu.
RS232-1/2
Set On to lock the RS232-1/2 Menu.
GLP Data
Set On to lock the GLP Data Menu.
GLP Print
Set On to lock the GLP Print Menu.
EN-25