Balance Settings; Calibration - OHAUS Adventurer Pro AV53 Manual De Instrucciones

Adventurer Pro

3.7 Balance Settings

Refer to section 3.4.2 Navigation for information on how to enter and navigate the menus.

3.7.1 Calibration

Adventurer Pro balances can be calibrated in two ways: Span calibration or Linearity calibration.
Span calibration resets the balance's weighing range using two weight values: zero and a
weight value between 25% and 100% of the balance's capacity. Linearity calibration minimizes
deviation between actual and displayed weights within the balance's weighing range. Three
weight values are used: zero, a weight value at or near the midpoint of the balance's weighing
range and a weight at or near the balance's specified capacity.
Calibration Masses
Before beginning calibration, make sure masses are available. Masses required for calibration
are listed in the table.
Model Linearity Cal Points
AV53 25g / 50g
AV212 100g / 200g
AV412 200g / 400g
AV811 400g / 800g
AV812 400g / 800g
AV2101 1000g / 2000g
AV4101 2000g / 4000g
AV8100 4000g / 8000g
AV8101 4000g / 8000g
Note 1: The default Span Cal Point is shown in Bold print.
Span Calibration Points (1)
30g, 40g, 50g
50g, 100g, 150g, 200g
100g, 200g, 300g, 400g
200g, 300g, 400g, 500g, 600g, 700g, 800g
200g, 300g, 400g, 500g, 600g, 700g, 800g
500g, 1000g, 1500g, 2000g
1000g, 2000g, 3000g, 4000g
2000g, 3000g, 4000g, 5000g, 6000g, 7000g, 8000g
2000g, 3000g, 4000g, 5000g, 6000g, 7000g, 8000g
EN-19