Arregui FORMA EVOLUTION Manual De Instrucciones página 6

<EN>
3. CHANGING THE OPENING CODES
The box has two opening codes available, a user code
and super-user code. Initially the codes are 1234 for
the user code, and 123456 for the super-user code.
To change the user code, proceed in the following
manner:
• Open the box and don't close it until the procedure
is complete
• Press the button located inside the box. The box will
emit a long whistle and the screen will display the
"NEW CODE" message.
• Introduce the new code from 3 to 8 digits and
confirm by pressing the
will display the "AGAIN" message.
• Introduce the new code and confirm with the
enter key. The box will emit a long acceptance beep,
and the screen will display the "U-CODE R" message,
to indicate that it has been registered.
To change the super-user code, proceed in the
following manner:
• Open the box and don't close it until the procedure
is complete.
• Hit the key.
• Hit the 8 key.
• Press the button located inside the box. The box
will emit a long beep and the screen will display the
"S-CODE" message.
• Introduce the current super-user code and confirm
via the enter key. If the code is entered correctly
the box will give off a long confirmation beep and
will display the "NEW CODE" message. If incorrectly
entered the screen will display the "ERROR"
message, and the process will have to be started
again.
• Introduce a new super-user code of 3 to 8 digits
and confirm with the
display the "AGAIN" message.
• Introduce the super-user code again, and confirm
with the enter key. The box will emit a long
acceptance beep and the screen will display
the "S-CODE R" message, to indicate that it has
registered.
enter key. The screen
enter key. The screen will
4. ADJUSTMENTS TO THE SCREEN AND
SOUND VOLUME
4.1. Adjusting the screen
If it is not desirable for access codes to be seen on
screen, then proceed in the following manner:
• Hit the key
• Introduce code 33
• Hit the enter key
Every time a digit is introduced on screen, it will be
represented by . To de-activate this option, repeat
the same procedure.
4.2. Adjustments to the sound volume
This function allows sound volume settings to be
configured in the strong boxes at 4 different levels of
intensity. For this you have to:
• Hit the key
• Introduce code 66
• Hit the enter key
• Introduce the sound volume intensity required, on a
scale of 0 to 3. Hit the
» 0 – there is no sound. The screen will display
"SOUNDOFF"
» Sound level 1. The screen will display "SOUND 1"
» Average sound level 2. The screen will display
"SOUND 2"
» Maximum sound level 3. The screen will display
"SOUND 3"
5. EMERGENCY OPENING
There is an envelope supplied along with these
instructions which contains two user keys (silver-
plated) and an emergency key (gold-colored) and an
external feed for 4 AA batteries with a micro USB
connector.
In the event that you don't remember the user or
super-user codes, or if the box is suffering from a
malfunction, such as its batteries discharging, etc.,
then you can open the box by means of the emergency
key. To do this, go ahead as follows:
• Insert the (gold-colored) emergency key, which you
will find within the envelope in the lock.
enter key.