Lamborghini Caloreclima Reply 51 Instrucciones De Uso página 79

Reply 51 - 71 - 101
Activating TEST mode
Press the heating buttons
The boiler lights at the maximum heating power set as described in the following section.
The heating symbol (detail 13 - fig. 1) and DHW symbol (detail 9 - fig. 1) flash on the display; the heating power will be
displayed alongside.
To deactivate TEST mode, repeat the activation sequence.
TEST mode is automatically disabled in any case after 15 minutes.
Only for model Reply 71/i-101/i
In TEST mode, press the button (detail 7 - fig. 1) to obtain the following operation:
• Top boiler shell on; bottom boiler shell off.
• Top boiler shell off; bottom boiler shell on.
• Top boiler shell on; bottom boiler shell on.
Heating power adjustment
To adjust the heating power, switch the boiler to TEST mode (see sec. 3.1).
Press the heating buttons
100).
reset
Press the button
sec. 3.1).
EN
(details 3 and 4 - fig. 1) at the same time for 5 seconds to activate TEST mode.
fig. 40 - TEST mode (heating power = 100%)
(details 3 and 4 - fig. 1) to increase or decrease the power (min. = 00 - max. =
(detail 8 - fig. 1) within 5 seconds; max. power will remain that just set. Exit TEST mode (see
cod. 3540H322 - 09/2008 (Rev. 01)
eco
reset
comfort
79