Turbo Operation; One-Hour Off Timer - AERMEC Plasmacluster EWA-H Manual De Instrucciones

TURBO OPERATION

In this operation, the air conditioner fan works at "extra high" speed with a setting
temperature of 15°C in COOL and DRY modes and 32°C in HEAT mode to rapidly cool
or heat the room.
NOTES:
• You cannot set the temperature or fan speed during TURBO operation.
• After the unit has run for 30 minutes in TURBO operation, the fan setting will become the
"HIGH" speed, and temperature setting will become 18°C in COOL and DRY modes.
• To turn off the TURBO lamp, press the DISPLAY button.

ONE-HOUR OFF TIMER

When the ONE-HOUR OFF TIMER is set, the unit will automatically turn off after one
hour.
NOTES:
• The ONE-HOUR OFF TIMER operation has priority over TIMER ON and TIMER OFF
operations.
• If the ONE-HOUR OFF TIMER is set while the unit is not operating, the unit will operate for
an hour at the formerly set condition.
• If you wish to operate the unit for another hour before the ONE-HOUR OFF TIMER is
activated, press the ONE-HOUR OFF TIMER button again during operation.
1
Press the TURBO button during operation.
• The remote control will display "
• The temperature display will go off.
• The green TURBO lamp (
up.
TO CANCEL
Press the TURBO button again.
• TURBO operation will also be cancelled when the
operation mode is changed, or when the unit is
turned off.
1
• The green TURBO lamp (
off.
1
Press the ONE-HOUR OFF TIMER button.
• The remote control will display "
• The orange TIMER lamp (
up.
• The unit will stop operating after one hour.
TO CANCEL
Press the CANCEL button.
• The orange TIMER lamp (
off.
1
Alternatively, turn the unit off by pressing the
ON/OFF button.
• The red OPERATION lamp (
TIMER lamp (
E-11
".
) on the unit will light
) on the unit will turn
) on the unit will light
) on the unit will turn
) and the orange
) on the unit will turn off.
".