Scope Of Delivery; Preparation For Use - Ottobock 757L35 Instrucciones De Uso

NOTICE
Distance to HF communication devices is too short (e.g. mobile
phones, Bluetooth devices, WiFi devices)
Lack of proper charging functionality due to malfunction.
► Therefore, keeping the following minimum distances to these HF com­
munication devices is recommended:
• Mobile phone GSM 850 / GSM 900: 0.99 m
• Mobile phone GSM 1800 / GSM 1900 / UMTS: 0.7 m
• DECT cordless phones incl. base station: 0.35 m
• WiFi (routers, access points ...): 0.22 m
• Bluetooth devices (third-party products not approved by Ottobock):
0.22 m

5 Scope of Delivery

• 1 pc. 757L35 MyoCharge Integral battery charger
• 1 pc. 757L16* power supply
• 1 pc. 647G534 instructions for use (qualified personnel)

6 Preparation for Use

1) Slide the country-specific plug adapter onto the power supply until it
locks into place (see fig. 1).
2) Connect the round plug of the power supply to the receptacle on the
battery charger so that the plug locks into place.
INFORMATION: Ensure correct polarity (guide lug). Do not use
force when connecting the cable plug to the battery charger (see
fig. 2).
3) Plug the power supply unit into the wall socket.
→ The green LED on the back of the power supply lights up.
7 Handling
► Connect the charging plug to the charging receptacle and allow it to
snap into place (see fig. 3).
→ LED 1 lights up blue (see fig. 4, arrow) and the beeper sounds.
→ The charging process starts.
During the charging process, the current battery charge level (Status sig­
nals) is indicated by the LEDs on the battery charger lighting up in sequence
(see fig. 5).
Ottobock | 15