Unfold And Adjust The Handle; Install The Grass Catcher; Install The Mulch Plug; Set The Blade Height - GreenWorks 25322 Manual Del Operador

EN
6.2 UNFOLD AND ADJUST THE
HANDLE
2
4
5
3
1. Pull up and back the upper handle to lift the handle
into operation position. Make sure that the handles
click into position correctly.
2. Tighten the upper handle with the cam locks on both
sides.
3. Tighten the lower handle with the cam locks on both
sides.
Make sure that the two handles are in the same
position.
Do not make damage to the cables when you fold or
unfold the handle.
6.3

INSTALL THE GRASS CATCHER

1. Remove the mulch plug.
2. Open the rear discharge door and hold it.
3. Hold the the grass catcher by its handle and engage
the hooks on the slots.
4. Close the rear discharge door.
5
NOTE
WARNING
10
11
12
English
6.4

INSTALL THE MULCH PLUG

10
9
1. Remove the grass catcher.
2. Open the rear discharge door and hold it.
3. Hold the mulch plug by its handle and fit it in the
discharge chute.
4. Close the rear discharge door.
6.5

SET THE BLADE HEIGHT

The machine can be set to different blade heights.
1. Pull the height adjustment lever rearward to
increase the blade height.
2. Pull the height adjustment lever forward to decrease
the blade height.
6.6

INSTALL THE BATTERY PACK

7
8
8
6