BOJ MC-2500 Manual De Uso página 4

English
• The scale has a measuring tolerance of -/+ 10%.
• This appliance is intended to be used in household and similar applications such as:
- Staff kitchen areas in shops, offices and other working environments;
- Farm houses;
- By clients in hotels, motels and other residential type of environments;
- Bed and breakfast type environments.
DANGER OF SERIOUS CUTTING INJURIES!
• Never put your hands inside the bowl while the appliance is plugged in. Avoid at all cost
touching the sharp blades when the appliance is plugged in and operating.
• Always unplug the appliance from the outlet when not in use.
• Always unplug the appliance before reaching into the bowl with your fingers or an object such
as the spatula.
• Always unplug the appliance before putting on or taking off accessories.
• Always unplug the appliance before cleaning.
• If the blades get stucked, always unplug the appliance before removing the ingredients that
blocking the blades.
• Keep hands, long hair, clothing, scarf, ties as well as spatula and other utensils away from the
top of the appliance during the operation to reduce the risk of injury and/or damage to the
appliance.
• Extra care shall be taken when handling the sharp cutting blades, emptying the bowl, and
during the cleaning process.
DANGER OF ELECTROCUTION!
• This appliance must be earthed. If you need to use an extension lead, it is important that you
use a model fitted with an earth plug.
• Ensure to check that the voltage marked on the rating plate matches to your local supply. If not
the case, do not use the appliance and seek for expert advice.
• Do not let the supply cord hang over edge of table or counter.
• Never immerse this appliance in water.
• For your own safety, we recommend you never use the appliance outdoor and never leave the
appliance in a place that is exposed to humidity or inclement weather condition.
• Never use appliance as an additional heating source.
• Never leave appliance plugged in when not in use. The appliance must not be left unattended
while it is connected to the main supply.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified technicians in order to avoid a hazard. The supply cord should be regularly
examined for signs of damage and the appliance is not to be used if the cord is damaged.
• The appliance is not intended to be operated by means of an external timer or separate
remote-control system.
• Never plug the appliance and touch the thermostat with wet hands.
- 4 -