Product Description - Ottobock 4X350 Instrucciones De Uso

► Please contact the qualified personnel if you have questions about the
product (e.g. regarding the start-up, use, maintenance, unexpected
operating behaviour or circumstances). Contact information can be
found on the back page.
► Please keep this document in a safe place.

2 Product Description

It is possible to switch from basic mode to the pre-configured MyModes
using the remote control. In addition, information about the prosthesis (step
counter, battery charge level, etc.) can be called up.
The behaviour of the prosthesis can be changed to a certain extent on a day-
to-day basis using the remote control (e.g. while becoming accustomed to
the prosthesis). At the next appointment, the prosthetist can trace the
changes using the adjustment software.
INFORMATION
The language of the user interface (menus) and the configuration and num­
ber of MyModes can only be changed/adapted using the adjustment soft­
ware.
INFORMATION
The connection to the original remote control can no longer be established
if the prosthesis is connected to another remote control. As a result, the
message "Device disconnected" appears in the display of the original
remote control when the connection is established.
INFORMATION
Bluetooth on the prosthesis must be turned on in order to use the remote
control. For more information about the Bluetooth function and whether it
can be turned on/off, see the instructions for use of the respective pros­
thesis.
24 | Ottobock