Ottobock 4X350 Instrucciones De Uso página 36

Adding new (prosthesis) connection (menu option "Pairing")
INFORMATION
The prosthesis serial number is needed to connect the remote control to
the prosthesis. This begins with the letters SN and is found in the following
position depending on the prosthesis:
Knee joints: On the inside of the frame.
Prosthetic feet: On the spherical cap.
22
1) Use the ,
menu and confirm this with the key (see fig. 22).
2) Use the ,
with the key to start the prosthesis search (see fig. 23).
→ If a prosthesis was found within the range, its serial number
appears in the display (see fig. 24).
3) Compare the serial number that is displayed to the serial number of the
prosthesis you want to connect to.
If the serial number 000000000 is displayed (multiple prostheses within
the range), use the , ,
prosthesis you want to connect to.
4) Press the key.
→ Once the connection has been established, the data are read from
the prosthesis (see fig. 25). This process may take a few minutes.
The blue LED will flash during the data transfer process.
5) Use the ,
should be saved and confirm this with the key.
INFORMATION: In addition, a prosthesis (item) that already exists
can be overwritten.
→ Data are read from the prosthesis and saved to the selected item.
→ The prosthesis is then displayed on the main menu.
36 | Ottobock
23
keys to select the menu option "RC settings" in the main
keys to select the menu option "Pairing", then confirm this
,
keys to select one of the four items to which the prosthesis
24
keys to enter the serial number of the
25