Connecting Cable Or Satellite With A Set-Top Box - HP SL4778N Manual De Instrucciones

c
CAUTION: Unplug power for the TV and all
connected components before connecting
the antenna or cable.
1
Connect a coaxial cable to the input source.
2
Connect the input source coaxial cable to the
ANT/Cable In connector on the rear of the TV.
If you find it difficult to screw the
coaxial cable onto the TV connector,
use the Ant/Cable Adapter from the
box; screw the threaded end of the
adapter into the input source coaxial cable, and
then push the adapter onto the ANT/Cable In
connector on the rear of the TV.
3
Connect power to the TV; see "Connecting power
to the TV" on page 21.
4
Turn on the TV; see "Turning the TV On and Off"
on page 23.
5
Select the input source to view, as well as the
Aspect, and other options; see "Operating the TV"
on page 29.
Connecting cable or satellite
with a set-top box
Connecting your TV directly to the audio and video
output of your set-top box ensures a more vivid picture
and enhances your viewing enjoyment. See "Choosing
the AV connection to use" on page 9 for connector
and cable information.
Optional equipment and all cables are sold separately.
You can connect a digital TV set-top box (air or cable),
and other AV equipment, by using a connector set from
one of the following inputs:
Digital High Definition Input: Connect an
■
HDMI cable from the digital, high-definition cable
or satellite set-top box to any of the HDMI
connectors.
Or
Connect a DVI-D cable and DVI-to-HDMI converter
from the digital, high-definition cable or satellite
set-top box with a DVI connector to HDMI 1, and
left-right audio cables to Audio In L and R.
HDMI supports 480i, 480p, 720p, 1080i, and
1080p input formats. The TV automatically
determines what has been connected. Some
set-top boxes must be set for a specific output
resolution. The HDMI connectors are:
HDMI 1 (with Audio In L and R)
■
HDMI 2
■
HDMI 3
■
Component High Definition Input: Connect
■
component video cables and left-right audio
cables from the high-definition cable or satellite
set-top box.
Component supports 480i, 480p, 720p, and
1080i input formats. The TV automatically
determines what has been connected. Some
set-top boxes must be set for a specific output
resolution.
The Component connectors are:
1: Y, Pb, and Pr, and Audio L and R
■
2: Y, Pb, and Pr, and Audio L and R
■
Standard Definition Input: Connect an
■
S-Video cable, or a composite video cable, and
left-right audio cables from the cable or satellite
set-top box. (Audio L and R connectors are shared
within the AV connector set.)
11
Setting Up the TV