Connecting Power To The Tv; Removing Or Attaching The Stand - HP SL4778N Manual De Instrucciones

Connecting power to the TV

1
Connect the AC power cord to the connector on
the rear of the TV.
2
Connect the AC power cord into the AC power
outlet.
3
Insert the cable clamp from the box into the
square hole on the rear of the TV.
4
Route the cables through the cable clamp.
Removing or attaching the
stand
Your TV comes with the stand attached. Reverse these
steps to attach the stand.
c
CAUTION: Use two people to disassemble
or assemble the TV.
Before removing the stand, unplug the AC power cord
from the AC power outlet, and remove any cabling.
1
Carefully place the TV panel with the glass screen
facing downward on a padded, stable table with
the TV stand extended over the edge of the table.
w
WARNING: Do not allow the stand to drop
onto the TV panel.
2
Remove four long screws that secure the stand
(pedestal) to the rear of the TV, and then lift off the
stand.
21
Setting Up the TV