Connecting The Tv To Your Home Network (Lan) - HP SL4778N Manual De Instrucciones

Select the input on the powered speakers or
■
amplifier.
Use the source device remote control to control
■
playback.
If using the TV ANT/Cable connector:
■
Connect the signal source to the ANT/Cable
■
connector. See "Connecting the cable TV or
air broadcast antenna" on page 10.
If the powered speakers or amplifier does not
■
support Digital Dolby, set the digital audio
format in the onscreen display Audio menu
Digital Audio option to PCM. See "Choosing
the digital audio output mode" on page 54.
For HDMI source devices, connect a separate
■
digital audio cable from the source device directly
to the powered speakers or amplifier. If the
powered speakers cannot access a second input,
use analog output from the TV. This TV does not
support Dolby Digital audio input over HDMI, and
does not output a digital audio signal from HDMI
input.
To program the TV universal remote to control all the
devices, see "Programming the Remote Control for a
Home Entertainment Device" on page 43.
Connecting the external sound system
c
CAUTION: Unplug power for the TV and all
connected components before connecting
an external sound system. Ensure that the
external sound system is powered off.
1
Connect the external sound system to the TV:
For a digital connection, connect an optical
■
audio cable to the Audio Output Digital
(Optical) connector on the rear of the TV and
to the external sound system, such as a digital
receiver or a surround sound system.
For an analog connection, connect an audio
■
cable to the Audio Out L and R connectors on
the rear of the TV and to the external sound
system, such as an analog amplifier or stereo
system.
2
Connect power to the TV; see "Connecting power
to the TV" on page 21.
3
Turn on the TV; see "Turning the TV On and Off"
on page 23.
4
Connect power to, and turn on, the external sound
system.
5
Define the digital audio format in the onscreen
display Audio menu Digital Audio option; see
"Choosing the digital audio output mode" on
page 54.
6
If desired, you can turn off the TV speakers by
using the onscreen display Audio menu Speakers
option; see "Using the Audio Menu" on page 54.
Connecting the TV to your home
network (LAN)
Connect the TV to the router in your PC local area
network (LAN) by connecting an Ethernet cable for a
wired connection, as described in this procedure. For
a wireless connection, the TV has internal wireless
antennas, which are ready to use; no antenna or other
connection is necessary.
The TV requires use of a router for connection to your
established home network (LAN).
A wired connection (Ethernet 802.3) uses an
■
Ethernet cable and connects through a router.
A wireless connection (Wi-Fi 802.11a/b/g/n)
■
must use the TV internal wireless antennas and
connect through a router.
n
HP recommends use of dual-band 802.11n
Wi-Fi for best wireless performance.
19
Setting Up the TV