Installation - Tecno-gaz PEARL Manual Del Usuario

ENGLISH
Failure to comply with the above will terminate the guarantee.
Disposal of the packaging components must be carried out in compliance
with the current regulations in the country where the device is used.
INSTALLATION (FOUNDATION)
Because of the characteristics of the device is important to follow certain
precautions:
The device should not be used in potentially explosive atmospheres.
Remove packaging, and check the status of the unit.
If any signs of damage to vehicles, alert the manufacturer.
Packaging must be preserved throughout the warranty period.
The manufacturer does not accept returns without original packaging.
The lamp is put in a cellophane bag and then arranged in a corrugated cardboard
box and prevented from moving about with polystyrene foam.
It must be transported following the rules for the transportation of fragile goods.
The original packaging should be kept for the duration of the guarantee period, since
only in this container is it possible to avoid damage in transit.
Place the unit on a horizontal surface, away from heat sources.
Place the device so that the dashboard controls and the LCD screen is clearly
visible from the operator.
Connect the power cord through the special connector on tap on the rear
lamp fg. 4.
12