Install The Ups; Setup The Ups - INFOSEC UPS SYSTEM E3 LCD RT 800 IEC Manual De Instrucciones

2.2 Install the UPS

For safety consideration, the E3 LCD RT is shipped without connecting battery wires. Before
installing the UPS, please follow the steps below to re-connect battery wires.

Step 1
Remove front panel.
Rack-mount installation

Step 1
Tower installation

Step 1

2.3 Setup the UPS


Step 1 - UPS input connection
Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using extension
cords.
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 01 13 AA 59 209 18

Step 2
Connect the AC input and
re-connect battery wires.

Step 2

Step 3
Put the front panel back to the
unit.

Step 2

Step 3
5