Description, Specifications And Standard Equipment Description; Specifications - RIDGID K-400 Manual Del Operador

The EC Declaration of conformity (890-011-
320.10) will accompany this manual as a sep-
arate booklet when required.
If you have any question concerning this
RIDGID ® product:
– Contact your local RIDGID distributor.
– Visit www.RIDGID.com to find your local
RIDGID contact point.
– Contact Ridge Tool Technical Service De -
part ment at rtctechservices@emer son.com,
or in the U.S. and Canada call (800) 519-
3456.
Description,
Specifications and
Standard Equipment
Description
The RIDGID ® K-400 Drain Cleaning Machine
will clean drain lines from 1
100mm) in diameter and 100 feet (30,5m) in
length depending on size of the cable. Cor -
rosion-resistant cable drum holds 75 feet
(22,5m) of 1 / " (12mm) diameter cable or 100
2
3
feet (30,5m) of / " (10mm) diameter cable.
8
Cable spins at 170 RPM. The K-400 is not
designed to remove root blockages.
The drum is belt-driven by a
motor that has a grounded electrical system.
An integral Ground Fault Circuit Interrupter
(GFCI) is built into the line cord. A FOR /OFF/ -
REV (or 1/OFF/2) switch controls drum and
cable rotation and a pneumatic foot switch
provides ON/OFF control of the motor.
The cable control system consists of a torque
limiter to stop the drum from rotating when
the tool stops rotating and the torque exceeds
the set value. This helps to prevent cable dam-
age from cable flip over in the drum. The torque
limiter is designed to work with RIDGID
and 1 / " integral wound (IW) cable, and may not
2
protect other cables.
The "Solid-Core" Integral Wound cable is
durable and kink-resistant. The cable has a
quick change coupling system for connect-
ing or disconnecting tools.
The optional AUTOFEED
to be advanced or retrieved at a rate of 10-14
feet per minute (3-4.3 m/minute).
1 / " to 4" (40 to
2
1 / HP electric
3
3 / "
8
® allows the cable
K-400 Drain Cleaning Machine
Warning Label
Folding
Handle
Belt
Guard
Wheels
RIDGID
Drain
Cleaning
Gloves
Figure 1 – K-400 Drum Machine

Specifications

Line Capacity .....1½" – 3" (40mm – 75mm)
Line with
3" – 4" (75mm – 100mm)
Line with ½" (12mm) Cable
The K-400 is not designed
to remove root blockages
Drum Capacity ...100' (30,5m) of
Diameter Cable
75' (22,5m) of
Diameter Cable
Motor Type..........Induction, Single Phase
Motor Rating .........120V
1/3 HP
6 Amp, 60 Hz 2.7 Amp, 50 Hz
No Load
Speed (n )..........170 RPM
o
Control ...............Rocker Type
FOR/OFF/REV switch and
pneumatic foot switch.
Some units have 1/OFF/2
Rotary Switch in place of
Rocker Switch.
Operating
Temperature.......20°F to 140°F (-6°C to 60°C)
Weight
(Machine Only)...40 lbs (18 kg)
(with 3 / " x 75' Cable, w/o
8
AUTOFEED) ....66 lbs (30 kg)
Dimensions:
Length................19.75" (500 mm)
Width..................17.25" (440 mm)
Height ................22.6" (575mm) Handle
Down, 37 .4" (930mm)
Handle Up
FOR/OFF/REV
Switch
(1/OFF/2)
Cord Wrap
Drum
Cable
GFCI
Foot
Switch
Tools
3 / " (10mm) Cable
8
3 / " (10mm)
8
1 / " (12mm)
2
230V
0.25 kW
140 RPM
5