1. Safe handling
Risk of death by electric shock!
Do not open the product.
Connect the product only to a grounded power
DANGER
supply.
Prior to use, check that the product is in good working order.
Store the charger and Li-ion batteries at room temperature.
Keep dry the charger and Li-ion batteries.
Charge the Li-ion batteries prior to first use.
To prevent damage caused by improper setup or operation, and to not
compromise the manufacturer warranty and liability:
– Use the product only according to these instructions for use.
– Follow the safety and maintenance instructions.
– Only combine Aesculap products with each other.
Keep the instructions for use accessible for the user.
Always adhere to applicable standards.
Ensure that the electrical facilities in the room in which the device is
being used conform to IEC norms.
Unplug the device by pulling the plug, but never by pulling the power
cord.
Do not operate the product in explosion-hazard areas.
Do not use the product if it is damaged or defective. Set aside the
product if it is damaged.
2. Product description
2.1 Package includes
Art. no.
Designation
GT800
Battery-operated clipping machine Econom CL,
GT810
Econom CL Equipe or
GT834
Econom CL Fitter
GT801
Li-ion battery
GT803
Charger
see Accessories/Spare
Mains power cord (with device plug)
parts
TA013895
Instructions for use
GT604
Hand oiler
2.2 Components required for operation
• Battery-operated clipping machine Econom CL/Econom CL Equipe/
Econom CL Fitter
• Charger
• Mains power cord (with device plug)
• Li-ion battery
2.3 Intended use
Battery-operated clipping machine Econom CL/Econom CL Equipe/
Econom CL Fitter
The battery-operated clipping machine Econom CL/Econom CL Equipe/
Econom CL Fitter is used for clipping large animals such as cattle, horses
and large dogs.
Charger GT803/Li-ion battery GT801
The GT803 charger is used to charge the GT801 lithium ion battery.
3