Toto Soirée TB6FS Manual De Instrucciones Y Del Propietario página 5

Installing the Spout Shank
1. Disassemble spout
shank as shown.
2. Insert spout shank
through hole and screw
in nut until it bottoms
out.
3. Secure spout shank
with gasket and lock-
nut.
Installing the Lever Handle Valves
1. Install hot valve on left side of
spout and cold valve on the
right side.
2. Disassemble threaded collar
from the valve.
3. Bring the locknut all the
way down.
4. Insert valve in the order
shown from under the deck
into side hole and screw in
the threaded collar until it
bottoms out.
5. Secure valve with locknut.
InSTaLLaTIon PRoCeDURe
Spout shank
L ocknut
Rough
deck
adapter
Valve
Rubber
Gasket
L ocknut
5
Nut
Gasket
Rough
Deck