Britax Child Safety, Inc.
Installing the Child Seat
General Information
Harness Mode
Install forward-facing only�
DO NOT use anything to raise the child seat off of the
vehicle seat�
Do not install with the lower anchors for a child weighing
more than 40 lbs (18�1 kg)�
Britax recommends that the top tether be used at all
times when installing the child seat� Using the top tether
will improve the stability of your child seat and reduce the
risk of injury�
•
Use this child seat in harness mode with children at
least 2 years of age and who weigh between 25 and
65 lbs (11�3 – 30 kg) and who stand between 34 and
49 in� (85 – 125 cm) in height� Britax recommends
using harness mode until your child outgrows its fit
requirements� See the Child Seat Fit Requirements
section on page 7 for more information�
•
This seat may be used in
either the upright or recline
position in harness mode
(see figures at right)�
8
WARNING!