Britax GROW WITH YOU CLICKTIGHT Guia Del Usuario página 16

Britax Child Safety, Inc.
Lap Belt with CLICKTIGHT
Before you begin:
• Check that your vehicle has a seat belt that can be
locked�
Check your vehicle owner's manual to determine
what type of vehicle belt you have and how it can be
locked for use with child seats�
• Check that your vehicle has a top tether anchor�
Britax recommends that the top tether be used at all
times when installing the child seat� Using the top
tether will improve the stability of your child seat and
reduce the risk of injury� Check your vehicle owner's
manual for tether anchor locations�
• Loosen the tether and place it over the child seat
back to keep it from becoming pinned between the
child seat and vehicle seat during installation�
• Adjust the child seat to desired position and place
forward facing on the vehicle seat�
1� Release the buckle and
open the CLICKTIGHT�
a� Locate the two slots in
the CLICKTIGHT cover�
b� Squeeze the
CLICKTIGHT release
levers�
2� Pull the vehicle belt out
and route along the green
belt path� Verify that the
belt is not twisted and then
buckle�
3� Lock and remove slack
from the vehicle belt�
IMPORTANT:
Overtightening the
belt may prevent the
CLICKTIGHT from properly
securing�
14