Britax Child Safety, Inc.
Troubleshooting
Problem
The CLICKTIGHT
will not close
with a click to
signal that
it is secure�
The harness is
hard to adjust�
The adjuster
strap is fraying
at the sides�
The buckle will
not fasten with
a click after
each tongue is
inserted�
Please contact Britax Consumer Services at 1-888-427-
4829 or 1-704-409-1699 if you have an issue not listed
here.
44
Possible Solution
There may be debris or other objects
interfering with the mechanism�
Ensure the seat area is clear of any
obstructions and try closing the
CLICKTIGHT again�
Check that the harness slots in the
head restraint and harness adjuster
are properly aligned�
The yoke may be caught on a strap
or other component of the child seat�
Remove the obstruction and try
adjusting the harness again�
Pull the harness adjuster strap
away from the child seat (parallel to
the ground) to tighten� Do not pull
sideways� Doing so may cause the
harness adjuster strap to fray at the
sides�
There may be debris in the buckle
mechanism� Clean the buckle as
shown on page 42 and try fastening
the buckle again�