General Features - KPS PF50 Manual De Funcionamiento

through the conductor
(2) Trigger
(3) Clamp Barrier
(4) LCD display
(5) H/ *' Button: Hold & Back Light
When push this button, the display will keep the last reading. Once push again,
the Meter will return the normal mode.
(6) Knob: it is rotary switch for select function.
(7) 'Hz/%' Button: Frequency & Duty cycle mode
(8) 'RANGE' Button: Change Auto or Manual mode
(9) 'FUNC' Button: Change function mode
(10) 'LPF' Button: Used as Low Pass Filter ON/OFF switch.
(11) 'INPUT' terminal
(12) 'COM' terminal
(13) 'REL' push button: Relative measurement mode
2.2 LCD display (see page 2)
Alternating current/ voltage
Directive current/voltage
Diode
Buzzer
Auto ranging mode
Relative measurement
Use LPF
No use LPF
Data hold
3. SPECIFICATIONS

3.1 General features

• Auto ranging Digital Clamp Meter. But the meter may select manual Fun tion
KPS-PF50 • Leakage clamp meter
Low battery indicator
% Duty cycle
mV, V Voltage unites
mA, A Current unites
ºC Temperature unite
nF, μF Capacitance unite
Ω, kΩ, MΩ Resistance unites
Hz, kHz Frequency unites
12