TFA Dostmann LOGO Manual De Instrucciones página 24

Note : Insert the batteries into the second transmitter within 45 seconds after the temperature
station displays the information of the first transmitter.
6. The outdoor temperature from the second transmitter and the "channel 2" icon should then be
displayed on the temperature station. If this does not happen after 2 minutes, the batteries will need
to be removed from all the units and reset from step 1.
7. Insert the batteries in the third transmitter as soon as the "channel 2" icon and outdoor data are
displayed on the temperature station. Then within 2 minutes, the channel 3 outdoor data from the
third transmitter will be displayed and the channel icon will shift back to "1" once the third transmitter
is successfully received. If this does not happen, restart the setting up from step 1.
Note : Insert the batteries into the third transmitter within 45 seconds after the temperature station
displays the information of the first transmitter or immediately after reception of the second
transmitter is finished.
8. In order to ensure sufficient 868 MHz transmission however, the distance between the temperature
station and the transmitter should not be more than 100 meters (see notes on "Positioning" and
"868 MHz Reception").
IMPORTANT:
Transmission problems will arise if the setting for additional sensors is not followed as described above.
Should transmission problems occur, it is necessary to remove the batteries from all units and start again
the set-up from step 1.
23