TFA Dostmann LOGO Manual De Instrucciones página 28

Note:
When the 868MHz signal is received correctly, do not re-open the battery covers of either the transmitter or
temperature station, as the batteries may spring free from the contacts and force a false reset. Should this
happen accidentally then reset all units (see Setting up above) otherwise transmission problems may
occur.
The transmission range is about 100 m from the transmitter to the temperature station (in open space).
However, this depends on the surrounding environment and interference levels. If no reception is possible
despite the observation of these factors, all system units have to be reset (see Setting up).
POSITIONING THE TEMPERATURE STATION:
The temperature station has been designed for hanging on a wall or free standing.
To wall mount
Before wall mounting, please check that the outdoor temperature values can be
received from the desired locations. To wall mount:
1.
2.
Fix a screw (not supplied) into the desired wall, leaving the head extended out
the by about 5mm.
Remove the stand of the temperature station by pushing inward and hang it
onto the screw. Remember to ensure that it locks into place before releasing.
27