General Information; Description - Hilti SI 100 Manual De Instrucciones

ORIGINAL OPERATING INSTRUCTIONS
SI 100 Impact Screwdriver
- Prior to using this electric tool, please
read the operating instructions without
fail.
- Always keep these operating instruc-
tions with the electric tool.
- Only pass on the electric tool complete
with operating instructions to another
person.
- Don't use this electric tool in any way
other than described in the operating
instructions.
Operating controls and component parts
³ O-ring
Nut setter socket
Retaining pin
Electronic switch for smooth starting
Speed and torque presetting wheel
Counter-clockwise rotation
Clockwise rotation
Reversing switch
Contents
General information
Description
Technical data
Anchor products / suitable tools
Connection to main supply
Safety precautions
Operating instructions
Maintenance
Manufacturer's warranty - tools
Disposal
EC conformity declaration (original)
Printed: 08.07.2013 | Doc-Nr: PUB / 5070689 / 000 / 01

General information

In these operating instructions, this symbol indi-
cates points of particular importance to safety. The
instructions at these points must always be observed
in order to avoid the risk of serious injury.
Danger: electricity
Symbols
Read the operating
instructions before use.
The numbers refer to the illustrations. The illustra-
tions can be found on the fold-out cover pages. Keep
these pages open while you read the operating instruc-
tions.
In these operating instructions, the electric tool to which
these operating instructions apply is referred to as "the
tool".

Description

9
The impact screwdriver SI100 is a hand-held tool.
9
10
11
Recommended screwdriver usage:
- Driving Hilti screw anchors of the HUS-H10 size and
11
larger into concrete of C20 to C50 grade and remov-
11
ing them in accordance with the manufacturer's re c-
13
ommendations. The HUS 7.5 size may not be screwed
14
in.
- Driving screws into Hilti HRD framing anchors and
14
driving in D-FV insulation fasteners in accordance
14
with the manufacturer's recommendations.
15
Return waste material
for recycling.
9