Technical Data - Hilti SI 100 Manual De Instrucciones

Technical data

Rated input:
Rated voltage: ✱
Rated current: ✱
Mains frequency:
No-load speed:
Impact speed:
Clockwise / counter-clockwise rotation:
Chuck:
Weight as per EPTA-Procedure 01/2003:
Max. tightening torque:
Double insulation, class II:
✱ This screwdriver is available wound for various nominal voltages. The nominal voltage and nominal current
draw / input of your screwdriver are shown on the nameplate.
-NOTE-
The vibration emission level given in this information sheet has been measured in accordance with a standardised
test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assess-
ment of exposure. The declared vibration emission level represents the main applications of the tool. However if
the tool is used for different applications, with different accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level over the total working period. An estimation of the
level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working peri-
od. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
Noise and vibration measured (in accordance with EN 60745):
Typical A-weighted noise levels of the tool are:
– Sound pressure level
– Sound power level
For the given sound power level as per EN 60745, the tolerance is 3 dB.
Wear ear protection!
Triaxial vibration value (vibration vector sum)
measured in accordance with EN 60745-2-2
Impact tightening of fasteners
of the maximum capacity of the tool, (a
Uncertainty (K) for triaxial vibration value :
Right of technical modifications reserved
10
Printed: 08.07.2013 | Doc-Nr: PUB / 5070689 / 000 / 01
470 W
110 V
4.3 A
50–60 Hz
0–2200 r.p.m.
Max. 2600 impacts/min.
Performance identical
" square pin with retaining pin
1 /
2
2.3 kg
100 Nm
EN 60745
95 dB (A)
106 dB (A)
): 8,4 m/s
h
1,5 m/s
230 V
2.1 A
2
2