Publicidad
Idiomas disponibles
Idiomas disponibles
2. Click on "Next" to continue.
3. Click on "Next" to continue.
4. Click on "Finish".
.
5. Select "Yes" to allow the installation of the
DNIe Root Authorization (AC RAIZ DNIE) in
your navigator. Thanks to this installation, the
certification could be properly done.
6. Click on "Ok".
7. Install Java application you will find in the CD
Driver. Run the file: jxpiinstall-6u12-fcs-bin-
b04-windows-i586-17_jan_2009.exe and wait
until the installation finishes.
Verification of installation
If you want to verify that the installation process has been completed properly, you can access to any of the available ser-
vices you can find in http://www.dnielectronico.es/servicios_disponibles/.
You can also verify the installation in a manual mode, following the next steps (depending on the navigator softwares ins-
talled in your PC).
1. Internet Explorer
Step 1. Insert the DNIe in its slot and then go to "Tools" menu
/ Internet Options / Content / Certificates.
Step 2. If the CSP module is correctly installed (Certification
Service Provider), the DNIe PIN will be required.
Step 3. Once you write the correct PIN of your DNIe, you will be
able to see your certificates in "Personal" section, and "Certification
entities":
- Certificate of Authentication
- Certificate of signature
SCT012 User Guide
Index
1. Welcome
2. Features
3. Technical Specifications
4. System Requirements
5. Content
6. Hardware
7. Installation
8. DNIe software installation
9. Card Reader
10. Uninstallation
11. FAQs
English
12
Publicidad
