Publicidad
Idiomas disponibles
Idiomas disponibles
Next, with the help of a second
person, bring the monitor assembly
which you have just put together in the
previous step to the top of the
handrails, as shown in Fig.5.
Then take the cable for the right
handrail (O), Fig.3 and insert it
through hole (P) at the bottom of the
handlebar (1-1) and pull it out through
the central hole (T) on the handlebar
(1-1), Fig.5. Insert screws (2), making
sure not to pinch the cables (P) fitted
previously, and hand tighten.
Note:
Make sure that the cables do not get
caught up when the unit is folded.
Now fully tighten the 4 screws (2).
Fit the handlebar cover (1-2), Fig.6
and
secure
using
Position the left and right handrail
covers
(4/4-1)
corresponding handrail, as shown in
Fig.6 and attach them by using screws
(39) and (40), as shown in Fig. 6.
3 FITTING THE MONITOR:
First of all, connect terminals (T)
sticking out of the central hole on the
handlebar (1-1) to the rear of the
monitor (1) Fig.7.
Plug terminals (F, G), sticking out of
the handlebar, Fig.6, into the bottom
of the monitor (1). Place the monitor
onto
the
support
handlebar (1-1), making sure not to
catch any of the cables, and secure it
using washers (134) and nuts (135).
Next, fit the back cover (6) and tighten
using screws (17), Fig.8.
4 FITTING THE STRUT
COVERS.-
Position the left and right bottom strut
covers (106 and 107) facing the
corresponding side strut, as shown in
Fig.9 and attach them by using screws
(42).
NOTE: Cylinder (Q) Fig.10 is factory
set to high pressure so it must not be
knocked.
If it is knocked this may damage it and
impair the operation of the treadmill.
5. FOLDING YOUR UNIT.-
This treadmill is equipped with a
folding
purposes. To use it, stop the treadmill,
lower the elevation level to minimum,
unplug the mains cable and lift the unit
until you hear lever (15) click into
place, Fig.11. Store your unit in a dry
place,
changes in temperature.
screws
(112).
6. UNFOLDING YOUR UNIT.-
facing
the
If you wish to use the treadmill, do the
reverse procedure. Use your to press
lever (15) in the direction of the arrow
as shown in Fig.11 and slowly lower
the treadmill belt down to the floor.
When folding or unfolding the treadmill
make sure that there are no children
about or obstacles that might hinder
the folding motion.
MOVEMENT & STORAGE.-
The unit is equipped with wheels (19),
Fig.11 to make it easier to move.
plate
on
the
Make sure that the mains cable is
unplugged from the wall socket.
If you wish to move the treadmill, the
first thing to do is to fold it up, place
your hands on the handrails (8 & 8-1)
and tilt the treadmill, Fig.12, so that
the wheels (19) rest on the floor.
To prevent accidents DO NOT move
the treadmill across uneven floors.
18
mechanism
for
preferably
not
subject
storage
to
Publicidad
