UK
MAIN CONTROLS
LEFT DIAL
1) High beam(/low beam light
control
Set this switch to"
lights and to"
" for low beam lights.
Left/right
position
switch
Press this switch to enable the left and
right and rear indicators. Press the cen-
tre to disengage them.
Sound warning switch
Press this switch to enable
the sound alarm
4) Passing button
Press this button (daytime) to enable
fl ashing lights
RIGHT DIAL
1) Electric ignition button
Press this button to start the engine with
the starter device,
Emergency light button
With the ignition key set to "
this switch to switch on
the emergency
fl ashing of all of the direction indicators
).
The emergency lights are used in case
of emergency, to advise the other road
" for high beam
users that your vehicle is about to stop
in dangerous traffi c areas.
indicator
WARNING:
Do not use the emergency lights when
the engine is off; this is to stop the bat-
tery from becoming flat.
3) Engine off button
Set this switch to "
switching on the engine. Set this
switch to "
engine in case of emergency, such
as, for example, when the motorbike
tilts over or the accelerator cable is
locked.
" use
lights (simultaneous
" before
" to switch off the
82
BN600R
1
4
2
3
3
2
1